Moving the Mermaid AC unit is providing diversion until I get a chance to run down to Houston to choose mahogany lumber and plywood for the dinette and a bit of holly for the sole to finish up the woodwork part of the saloon remodel. The photo is of a new stitch and glue supply plenum made of 1/4 plywood with fabric reinforcement, wide internal fillets, lots of System Three laminating epoxy, etc. The sleeves are made of cloth and epoxy rolled up on appropriately-sized cylinders and sliced to length on my table saw. They are attached to the plenum with epoxy fillets. One more Saturday morning should about do it for the AC.

I also began moving wiring over to the new house battery location under the port settee. There is not an old wire in the lot. How nice.